Exit Devices

Home » Locks and Exit Devices » Exit Devices
  • ALARM EXIT DEVICE

    Product #: N1800

    Our N1800 exit device is available in fire rated and non fire rated options, please specify choice when ordering. This exit device is always in stock. Questions? contact us at info@gulfport-corp.com for more information.
    • C-UL US listed as Panic & Fire Exit Hardware
    • For single and double doors applications
    • For doors 1-3/4”(44.5mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Chassis is made from steel
    • Dogging feature of panic is not available
    • Equipped with an internal horn and a signal switch
    • Horn sound and the LED on device and / or a red light which is connected to security guard room flashes if installed
    • Time adjustable alarm switch, preset at factory for two minute alarm cut off
    • Operates by one standard 9 volt battery
    • When battery is weak, the horn will emit an intermittent signal
    • “EMERGENCY EXIT ONLY, ALARM WILL SOUND” will be printed on the surface of touch bar
    • Exit Device takes any standard rim cylinder
    • No. 27 strike is standard
    • Sex bolts available upon request
    • FINISHES: 3, 4, 10, 28, AMB
    1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N1650 exit device is easy to install and crafted with superior engineering. This exit device comes with combination screws and an optional stainless steel chassis. Questions? contact us at info@gulfport-corp.com for more information.
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Fire Exit Hardware (FIRE RATING 3 HOURS)
    • For single doors or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Covers are cold drawn brass, bronze, aluminum or stainless steel
    • The main latchbolt is stainless steel 3/4” (19mm) throw and has deadlocking feature
    • Not available with dogging feature
    • Exit Device takes any standard rim cylinder
    • No.13 surface mounted adjustable strike is standard
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N650 exit device is designed for use in high traffic areas. This exit device comes with combination screws and an optional stainless steel chassis. Questions? contact us at info@gulfport-corp.com for more information.
    • Easy to install
    • Superior engineering
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Fire Exit Hardware
    • For single door or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Arms are drop forged brass, bronze or extruded aluminum
    • Covers are cold drawn brass, bronze, aluminum or stainless steel
    • Crossbar 1”(26mm) O.D. brass, bronze, aluminum or stainless steel
    • Crossbar height 37”(940mm) from finished floor, recommended
    • Inactive case can be furnished with centre bearing at an additional cost
    • Main latchbolt is stainless steel 3/4”(19mm) throw and has deadlocking feature
    • Not available with dogging feature
    • Exit Device takes any standard rim cylinder
    • No.13 surface mounted adjustable strike is standard
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs.
  • Our N500 Exit Device is designed for use in high traffic areas. This exit device comes with combination screws and an optional stainless steel chassis. Questions? contact us at info@gulfport-corp.com for more information.
    • Average number of moving pieces is 3
    • Easy to install
    • Superior engineering
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic Exit Hardware
    • For single doors or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Arms are drop forged brass, bronze, aluminum or stainless steel
    • Covers are cold drawn brass, bronze, aluminum or stainless steel
    • Crossbar 1”(26mm) O.D. brass, bronze, aluminum or stainless steel
    • Crossbar height 37”(940mm) from finished floor, recommended
    • Inactive case can be furnished with centre bearing at an additional cost
    • Latchbolt is extruded brass 3/4”(19mm) throw
    • Exit Device takes any standard rim cylinder
    • No.22 surface mounted adjustable strike is standard
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Engineered to be the ultimate in reliability and durability the amazing N1500 Heavy Duty Rim Exit Device has only three moving parts avoiding possible points of failure present in more complex designs. With an unmatched record of reliability and safety and the option for complete stainless steel construction inside and out, the N1500 is the is the clear choice for critical installations in high traffic environments. This exit device is always in stock. Questions? contact us at info@gulfport-corp.com for more information.
    • Average number of moving pieces is 3
    • Easy to install
    • Superior engineering
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic Exit Hardware
    • For single doors or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Cover and all channels are aluminum, brass, bronze or stainless steel
    • Latchbolt is extruded brass 3/4”(19mm) throw
    • Exit Device takes any standard rim cylinder
    • No.22 surface mounted adjustable strike is standard
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N1750 exit device is available in fire rated or non fire rated options. Please specify choice when ordering.
    • Superior engineering
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic & Fire Exit Hardware
    • For single or double doors 1-3/4”(45mm) to 2-3/4”(70mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Cover and all channels are cold drawn brass, bronze, aluminum or stainless steel
    • Case 4”(102mm) by 5-3/4”(146mm) by 1”(26mm) heavy steel, zinc finish
    • Face plate 8”(203mm) by 1-1/4”(32mm); bevel 1/8”(4mm) in 2”(51mm) from brass, bronze or stainless steel
    • Latchbolt is brass; anti-friction 3/4”(19mm) throw
    • Dead locking latchbolt is brass 3/8”(9mm) by 3/4”(19mm); deadlocks latchbolt when door is closed
    • Mortise device take 1-1/8”(30mm) mortise cylinder standard cam
    • Fire rated devices not available with dogging feature
    • Specify hand when ordering, not reversible
    • No.21 strike is standard, HANDED
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N750 exit device is designed for use in high traffic areas and is is available in non fire and fire rated options. Please specify choice when ordering. This exit device comes with combination screws and an optional stainless steel chassis. Questions? contact us at info@gulfport-corp.com for more information.
    • Easy to install and superior engineering
    • C-UL US listed as Panic & Fire Exit Hardware
    • For single or double doors 1-3/4”(45mm) to 2-3/4”(70mm) thick
    • Covers are cold drawn brass, bronze, aluminum or stainless steel
    • Crossbar 1”(26mm) O.D. made from brass, bronze, aluminum or stainless steel
    • Crossbar height 37”(940mm) from finished floor, recommended
    • Inactive case can be furnished with centre bearing at an additional cost
    • Chassis is available in stainless steel
    • Case 4”(102mm) by 5-3/4”(146mm) by 1”(26mm) heavy steel, zinc finish
    • Face plate 8”(203mm) by 1-1/4”(32mm); bevel 1/8”(4mm) in 2”(51mm) from brass, bronze or stainless steel
    • Latchbolt is brass; anti-friction 3/4”(19mm) throw
    • Dead locking latchbolt is brass 3/8”(9mm) by 3/4”(19mm); deadlocks latchbolt when door is closed
    • Mortise device take 1-1/8”(30mm) mortise cylinder standard cam
    • Fire rated devices not available with dogging feature
    • Specify hand when ordering, not reversible
    • No.21 strike is standard, HANDED
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • RIM EXIT DEVICE

    Product #: N550

    Our N550 exit device is easy to install and crafted with superior engineering. This exit device comes with combination screws and optional sex bolts are available upon request. Questions? contact us at info@gulfport-corp.com for more information.
    • Average number of moving pieces is 3
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic Exit Hardware
    • For single doors or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Arms are extruded aluminum
    • Covers are cold drawn aluminum
    • Chassis is steel
    • Crossbar 1”(26mm) O.D. made from aluminum
    • Crossbar height 37”(940mm) from finished floor, recommended
    • Latchbolt is extruded brass 3/4”(19mm) throw
    • Exit Device takes any standard rim cylinder
    • No.22 surface mounted adjustable strike is standard
    FINISH: US27 – Anodized Aluminum 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • RIM EXIT DEVICE

    Product #: N1550

    Our N1550 exit device is available in a variety of finishes. This exit device is always in stock. Questions? contact us at info@gulfport-corp.com for more information.
    • Average number of moving pieces is 3
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic Exit Hardware
    • For single doors or double doors with mullion
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Cover and all channels are aluminum
    • Latchbolt is extruded brass 3/4”(19mm) throw
    • Exit Device takes any standard rim cylinder
    • No.22 surface mounted adjustable strike is standard
    • Sex bolts available upon request
    FINISH: US27 – Anodized Aluminum 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N1900 exit device is available in non fire rated and fire rated options, please specify choice when ordering. This exit device comes with thru-bolts for narrow stile aluminum doors.
    • C-UL US listed as Panic & Fire Exit Hardware
    • For single door or double doors with mullion
    • For doors 1-3/4”(44.5mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Covers are die cast brass, zinc or aluminum
    • Door channels are aluminum, brass, bronze or stainless steel
    • Latchbolt is cast brass 3/4”(19mm) throw
    • Exit Device takes any standard rim cylinder
    • No.24 surface mounted adjustable strike is standard
    • If device is to be used on aluminum doors, specify strike No. 23
    • For 3' narrow stile aluminum doors, order 4' device
    • FINISHES: 3, 4, 5, 10, 10B, 20M, 27, 32D, AMB
    1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N2150 exit device is easy to install and ideal for single and double door applications. Available in non fire and fire rated options, please specify choice when ordering. This exit device takes any standard rim cylinder.
    • C-UL US listed as Panic & Fire Exit Hardware
    • For doors 1-3/4”(44.5mm) thick
    • Touch bar height 40-1/16”(1017mm) from finished floor, recommended
    • Covers and channels are aluminum painted (689)
    • Chassis is made from steel
    • The main latchbolt is stainless steel 3/4” (19mm) throw and has deadlocking feature
    • No.25 and No. 26 strikes supplied
    • Optional No.28 double door strike
    • FINISHES: 28(689)
    1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
  • Our N700 exit device is designed for use in high traffic areas and is available in  non fire and fire rated options.. This exit device comes with combination screws and an optional stainless steel chassis. Questions? contact us at info@dev.lockwood1878.com for more information.
    • Superior engineering
    • Tested in accordance with ANSI A156.3 Grade 1
    • C-UL US listed as Panic & Fire Exit Hardware
    • For doors 1-3/8”(35mm) to 2-3/4”(70mm) thick
    • Covers are cold drawn brass, bronze, aluminum or stainless steel
    • Chassis top and bottom made of steel, stainless steel for fire rated device
    • Crossbar height 37”(940mm) from finished floor, recommended
    • Inactive case can be furnished with centre bearing at an additional cost
    • Latchbolt at top and slide bolt at bottom, both have 3/4”(19mm) throw
    • Vertical rods are 1/2”(13mm) O.D.
    • Exit device takes any standard rim cylinder
    • Automatic device holds both bolts retracted when door is open
    • Fire rated devices not available with dogging feature
    • Top strike No.14 surface mounted
    • Bottom strike No.15 mortised into floor
    • Sex bolts available upon request
    FINISHES: 3, 4, 5, 10, 10B, 27, 32D 1 Pcs. IMPORTANT: PLEASE REVIEW FUNCTION AND EXTERIOR TRIM OPTIONS PDF BELOW TO DETERMINE THE APPROPRIATE EXIT DEVICE FUNCTION AND EXTERIOR TRIM!
Go to Top